Motionless Mixer -       M series (Inline)

These "in Stock" mixers feature very high mixing efficiency with short mixing length. The Komax motionless mixer achieves high efficiency through triple action mixing. They are designed for use where additives to the main pipeline flow have already been introduced upstream of the mixer.

The simple, three step design procedure shown below allows the rapid choice of line size, number of mixing elements and pressure drop Available from stock, mixers are supplied with two, three or four mixing elements.

All have 150 lb. flanges, and materials of construction are carbon steel, 316 stainless steel, PVC and fiberglass. Dimensions and design graphs for all "M" Series mixers are listed below.

KOMAX STATIC MIXER DESIGN

Use the following three simple steps to solve most turbulent flow mixing problems.

1. Calculate the Reynolds number Re from Re = 3157QS/m D, and velocity from V = .408Q/D² feet/sec. where Q = flow rate in US gpm, S = specific gravity, m = viscosity in cp, and D = pipe inside diameter in inches.

2. Enter the first graph at the calculated velocity, and move up to the calculated Reynolds number region. Now, move horizontally to the left and read the required number of elements. Round to the nearest upper number.

3. Enter the next graph at the velocity value and move up to the line corresponding to the number elements. Move horizontally left to read the basic pressure drop. Correct for specific gravity and viscosity.