Saving energy is a problem that plagues many industries. Efficiency is another factor when looking into heat exchangers. Which is why the Klean-Wall heat exchanger is a solution that resonates with so many companies in a variety of industries.
A heat exchanger is a device that allows heat from a liquid or gas to pass to another fluid without mixing the two fluids together. It can work for cooling or heating purposes. The purpose of a heat exchanger (HE) is to save as much energy as possible.
A car radiator is an example of a cooling device used in the engine in which hot liquid flows through exposed pipes and transfers heat to the air by fans. Fans are used to conduct the heat from the tubes and transfer it to air.
Swimming pools are another example of a household item that uses a heat exchanger. The heat exchanger uses hot water from a boiler to heat the pool water.
Heat exchangers maximize the natural process of heat transfer from high temperatures to lower temperatures. This tool transfers heat directly and indirectly.
Industries that are reliant on heat exchangers are Biofuel, Municipal Wastewater, Petroleum, Oil and Chemical, and Steam Power Plants.
A Klean-Wall heat exchanger can be used for the following:
It is a non-fouling, non-clogging equipment that promotes a self-cleaning environment. That delivers the best possible heat.
The Klean-Wall system does not clog. It can pass debris up to 50% of the diameter of the pipe. Even the stringy rope-like debris.
The Klean-Wall heat exchanger helps increase bacteriological activity and better anaerobic digestion because of its sludge and shearing mixing.
It eliminates any wall buildups by the high level of turbulence at the walls. Sludge consistently scavenges the surface to the wall to remove fouling. With a Klean-Wall Heat Exchanger, the material causing thickness along the wall won’t lower efficiency.
They need no cleaning. However, if you want to do preemptive cleaning. The Hi-Pass design will allow you to easily clean it down the centerline to the hydro-rod.
Komax’s Klean-Wall heat exchanger is the solution to saving energy and preserving the environment. All while providing operational efficiency. They install these exchangers in many plants worldwide and make a difference in production. Komax is a leader in the static mixers, steam heaters, desuperheaters, and heat exchangers technology.